Riverbed SteelHead 3070-SD, User Manual

Page: 72 / 124

72 | Configuring BGP and OSPF Routing Policies on SteelHead SD
Creating routing IPv4 prefix lists
Basic steps
Perform these basic steps to configure routing polices.
1. If you have a SteelConnect SDI-2030 gateway, configure a dynamic routing policy. For details, see
the SteelConnect Manager User Guide .
Note: You can’t create dynamic routing policies for SteelHead SD 570-SD, 770-SD, and 3070-SD appliances located
at the branch.
2. Configure IPv4 prefix lists. For details, see “Creating routing IPv4 prefix lists” on page 72 .
3. Configure community lists. For details, see “Creating routing community lists” on page 73 .
4. Configure AS prefix lists. For details, see “Creating routing AS path lists” on page 74 .
5. Configure route maps by specifying the available use cases. For example, create a route map for a
routing policy to establish BGP neighbors. For details, see “Configuring BGP route redistribution” on
page 47 .
6. Configure inbound and outbound route maps and prefixes for BGP neighbors using the configured
route maps. For details on configuring BGP neighbors, see “Enabling BGP and configuring BGP
neighbors on SteelHead SD” on page 42 .
7. Configure BGP redistribution and BGP summarization settings using the configured route maps. For
details, see “Configuring BGP route redistribution” on page 47 and “Configuring BGP route
summarization” on page 52 .
Creating routing IPv4 prefix lists
An IPv4 prefix list contains a list of IPv4 prefixes and a name that is associated for each list. For details on
how prefix lists is used in BGP routing, see
“Configuring conditional default-route originate routing” on
page 48 .
To create a IPv4 prefix list
1. Choose Routing > IPv4 Prefix Lists.
2. Click Add IPv4 Prefix List .
Figure 8-2. Creating an IPv4 prefix list
3. Specify the name of the IPV4 prefix list.
4. Click Submit .