Riverbed SteelHead 3070-SD, User Manual

Page: 18 / 124

18 | Configuring Virtual SteelHead WAN Optimization
Enabling WAN Optimization in SCM
2. Select the SteelHead SD appliance to expand the page.
3. Select the Services tab.
Figure 2-2. Enabling WAN optimization in SCM
4. Under WAN Optimization Service, fill out these required session attributes:
• WAN Optimization Service - Click Enabled to enable the WAN optimization service for the selected
SteelHead SD appliance. When disabled, the WAN optimization service will not participate in any
WAN optimization functionality. If disabled, any configuration related to WAN optimization service
on this appliance will not be applied.
• SteelHead Zone - Select the zone to which this SteelHead SD appliance belongs. Only zones that
are attached to a physical port can be used to configure the SteelHead SD IP address. Choose
Appliances > Port to attach a zone to a port.
• SteelHead Inpath IP Address - Specify the SteelHead in-path IP address. The IP address must be
within the LAN zone subnet. This value tells SCM what in-path IP address you are using for the
virtual SteelHead instance.
5. Click Submit .
After the WAN optimization service has been enabled within SCM, the SteelHead SD triggers the
orchestration and provisioning of the virtual SteelHead instance. This action causes a momentary
interruption to operations within SteelConnect because it is reconfigured with the SteelHead LAN and
WAN interfaces.