Rigol DS2000E Series, User Manual, Page: 245 / 283

Chapter 13 System Function Setting RIGOL
DS2000E User’s Guide 13-7
USB Device
This oscilloscope can communicate with a PC or a PictBridge printer via the USB
Device interface on the rear panel. You need to set the oscilloscope to make it
match with different device types.
Press Utility

IO Setting

USB Device and use to select the desired
device type.

Computer: in this type, the oscilloscope can communicate with the PC.

PictBridge: in this type, the oscilloscope can communicate with the PictBridge
printer.
GPIB Address
When using the GPIB mode to control the oscilloscope, you need to extend a GPIB
interface for the oscilloscope using the USB-GPIB interface converter (need to be
ordered separately).
To set the GPIB address of this interface, press Utility

IO Setting

GPIB and
use to input the desired address. The default is 1 and the range is from 1 to 30.