Rigol DS2000E Series, User Manual, Page: 162 / 283

RIGOL Chapter 6 MATH and Measurements
6-32 DS2000E User’s Guide
Note: When the current measurement source is MATH, only the
parameters in the Zoom region can be measured.

When Zoom is disabled, "Main" is automatically selected in Screen and
cannot be modified.
4.
Select X (Y) Axis Unit
When the measurement source is "CH1", "CH2" or "MATH"
When the display mode is "X" or "X-Y", press Time Unit to select "s", "Hz", "°"
or "%".

s: in the measurement results, A->X, B->X and
△
X denote time and 1/
△
X
denotes frequency.

Hz: in the measurement results, A->X, B->X and
△
X denote frequency and
1/
△
X denotes time.

°: in the measurement results, A->X, B->X and
△
X are expressed in degree.
At this point, A->X, B->X and
△
X will change to "0°", "360°" and "360°"
respectively when you press SetCursor, no matter where cursor A and
cursor B are currently located. At the same time, two cursor lines
(unmovable) appear on the screen as the reference positions.

%: in the measurement results, A->X, B->X and
△
X are expressed in
percentage.
At this point, A->X, B->X and
△
X will change to "0%", "100%" and "100%"
respectively when you press SetCursor, no matter where cursor A and B
are currently located. At the same time, two cursor lines (unmovable)
appear on the screen as the reference positions.
Note: When the display mode is set to "Y", the Time Unit menu will be hidden
automatically and cannot be set.
When the display mode is "Y" or "X-Y", press Vertical Unit to select "Source
Unit" or "%".

Source Unit: when this unit is selected, in the measurement results, the
units of A->Y, B->Y and
△
Y will be automatically set to the unit of the
current source.

%: when this unit is selected, in the measurement results, A->Y, B->Y and
△
X are expressed in percentage. At this point, A->Y, B->Y and
△
X will
change to "0%", "100%" and "100%" respectively when you press
SetCursor, no matter where cursor A and B are currently located. At the
same time, two cursor lines (unmovable) appear on the screen as the