Rigol DS2000E Series, User Manual, Page: 133 / 283

Chapter 6 MATH and Measurements RIGOL
DS2000E User’s Guide 6-3

Press Label to define a label for the operation results. For the details, please
refer to "
MATH Label".

HORIZONTAL POSITION and HORIZONTAL SCALE can also be
used to adjust the horizontal position and scale of the operation results.
Multiplication
Multiply the waveform voltage values of signal source A and B point by point and
display the results. Press MATH

Operate to select "A x B":

Press Source A and Source B respectively to select the desired channels (CH1
or CH2).

Press and use to adjust the vertical position of the operation results.

Press and use to adjust the vertical scale of the operation results.

Press Invert to turn the inverted display of the operation results on or off.

Press Label to define a label for the operation results. For the details, please
refer to "
MATH Label".

HORIZONTAL POSITION and HORIZONTAL SCALE can also be
used to adjust the horizontal position and scale of the operation results.
Division
Divide the waveform voltage values of signal source A by that of source B point by
point and display the results. It can be used to analyze the multiple relationships of
waveforms in the two channels.
Note: When the waveform voltage value of signal source B is 0, the result of the
division is treated as 0.
Press MATH

Operate to select "A ÷ B":

Press Source A and Source B respectively to select the desired channels (CH1
or CH2).

Press and use to adjust the vertical position of the operation results.

Press and use to adjust the vertical scale of the operation results.

Press Invert to turn the inverted display of the operation results on or off.

Press Label to define a label for the operation results. For the details, please
refer to "
MATH Label".