Ricoh TotalFlow Print Server R-62, Setup Manual

Page: 45 / 66

Using the Standard TCP/IP port
1. Quit all applications.
2. Insert the provided CD-ROM into the client computer's CD-ROM drive.
If the [AutoPlay] dialog box appears, click [Run SETUP.EXE].
3. Select an interface language, and then click [OK].
4. Click [PostScript 3 Printer Driver] on the installer screen.
5. The software license agreement appears in the [License Agreement] dialog box. After
reading the agreement, click [I accept the agreement.], and then click [Next >].
6. Make sure that [PS Printer Driver] is selected, and then click [Next>].
7. Select [Specify a new port], and then click [Next >].
8. Select [Standard TCP/IP Port], and then click [Next >].
9. Click [Next].
10. Enter the machine name or IP address, and then click [Next].
When the device type selection appears, select "RICOH Network Printer C model". When using a
virtual printer, select [Custom], click [Settings], and then specify the same port number as that of the
virtual printer under Raw Settings.
11. Click [Finish].
12. Make sure that the [Printer Name :] check box of the machine model you want to use is
selected.
13. Configure the default printer and shared printer as necessary.
14. Click [Continue].
The installation starts.
15. Click [Finish].
16. Specify when to restart your computer, and then click [Finish].
• The [AutoPlay] dialog box is displayed only for a few seconds under Windows 8.1/10 and
Windows Server 2012/2012 R2/2016. If the [AutoPlay] dialog box disappears, use the
following procedure to replay the CD-ROM:
• Windows Server 2012
1. On the Charm Bar, click [Search], and then click [Computer].
2. Double-click the CD-ROM drive in which the provided CD-ROM is set, and then click
"Setup.exe".
• Windows 8.1, Windows Server 2012 R2
1. On the desktop, right-click the [Start] button, and then click [File Explorer].
3. Getting Started
44