Ricoh TCRU/ORU, Troubleshooting Manual

Page: 45 / 184

Solution:
1. In [Advanced Settings] for the custom paper you are using, select [Fuser] in 1341: [Motor
Speed].
2. Check the present value. Is it higher than +2.5%?
Yes No further improvement is likely. Contact your service representative.
No Increase the value by 0.5 percentage points.
3. Print the image. Has the problem been resolved?
Yes Finished!
No Repeat Steps 1 to 3. If the problem persists even though you have increased the
value to +2.5 percentage points, contact your service representative.
Vertical Black (color) Streaks (2)
Extended, blurred black (color) streaks parallel to the paper feed direction appear. The streaks also
appear randomly in the margins.
CWH401
Cause:
If the temperature or humidity is low, remaining toner might be missed by the cleaning blade of the ITB
cleaning unit or paper transfer unit, causing streaks to appear sporadically.
Solution:
1. To identify the affected color, print three full-page, solid-fill A3 or DLT sheets for each of
cyan, yellow, magenta, and black.
Streaks
43