Ricoh TCRU/ORU Troubleshooting Manual Download Page 149

Page: 149 / 184

CEZ514

As a bundle is delivered, its folded edge may droop and catch on the stacked bundles, causing the
delivered bundle to flip over.

Solution:

Use the Z-fold support tray for multi-folding unit.
This will reduce the angle of stacked bundles and prevent bundles flipping over as they are delivered.

DFP351

For details about using the Z-fold support tray for multi-folding unit, see "Preparation" supplied with the
machine.

• If the Z-fold support tray for the multi-folding unit is attached, folded paper such as letter-folded

paper or gate-folded paper will not turn over in the output tray when delivered.

Multi-Folding Unit

147

Summary of Contents for TCRU/ORU

























































































































































































Search results

Summary of Contents for TCRU/ORU

Reviews:

Related manuals for TCRU/ORU

Brands by name

Popular brands

Ricoh TCRU/ORU, Troubleshooting Manual

Search results

Summary of Contents for TCRU/ORU

Reviews:

Related manuals for TCRU/ORU

Brands by name

Popular brands