Ricoh SP 320SFN User Manual Download

Page: 40 / 380

Check there are no gaps between the paper and the paper guides; both side and end
paper guides.

DSG115

Carefully push tray 1 straight into the machine.

To avoid paper jams, make sure the tray is securely inserted.

• The remaining paper indicator on the left front side of the paper tray shows approximately how

much paper is remaining.

Extending the Tray 1 to load paper (When Using SP 377SNwX or SP 377SFNwX)

This section explains how to load paper longer than A4 (297 mm) into the machine.

Pull out tray 1 carefully with both hands.

Place the tray on a flat surface.

Remove the tray 1 rear cover by pushing its center.

DSG116

Release the extender lock on the left rear of the tray, and then pull out the extender until
it clicks.

Make sure the extender's inner surface and the scale are aligned.

2. Paper Specifications and Adding Paper

Summary of Contents for SP 320SFN





























































































































































































































































































































































































Search results

Summary of Contents for SP 320SFN

Reviews:

Related manuals for SP 320SFN

Brands by name

Popular brands

Ricoh SP 320SFN, User Manual

Search results

Summary of Contents for SP 320SFN

Reviews:

Related manuals for SP 320SFN

Brands by name

Popular brands