Ricoh SP 320SFN, User Manual

Page: 278 / 380

Message Causes Solutions
Out of Paper: X The indicated tray has run out of
paper. Load paper to the indicated tray. See
page 36 "Loading Paper".
Please Restart
Machine The machine needs to be
restarted. Turn off the power, and then turn it back
on.
Print Cart. Set Error The print cartridge has not been
installed or has not been
installed correctly. Reinstall the print cartridge. See page 259
"Replacing the Print Cartridge".
Remove Paper:
Bypass Tray The machine failed to proceed
with the print job, because tray
1 was specified as the input tray
but paper was set in the bypass
tray. Remove paper from the bypass tray.
Replace Required
Soon:
Print Cartridge The print cartridge is almost
empty. Prepare a new print cartridge.
Replacement
Required:
Fusing Unit The fusing unit is no longer
usable, and must be replaced. Contact your sales or service
representative.
Replacement
Required:
Paper Feed Roller The paper feed roller is no
longer usable, and must be
replaced. Contact your sales or service
representative.
Replacement
Required:
Print Cartridge The machine has run out of
toner. Replace the print cartridge. See page 259
"Replacing the Print Cartridge".
Replacement
Required:
Transfer Roller The transfer roller is no longer
usable, and must be replaced. Contact your sales or service
representative.
RX Comm. Error A reception error occurred, and
the fax could not be received
correctly. If possible, contact the sender of the fax
and ask them to resend it.
10. Troubleshooting
276