Ricoh Mo-C1, Service Manual, Page: 904 / 1052

5853
Stamp Data Download
Push [Execute] to download the fixed stamp data from the machine ROM onto the hard
disk.
• After downloading these stamps can be used by the system. If this is not done, the
user will not have access to the fixed stamps ("Confidential", "Secret", etc.).
• You must always execute this SP after replacing the HDD or after formatting the
HDD. Always switch the machine off and on after executing this SP.
5856
Remote ROM Update
When set to "1" allows reception of firmware data via the local port (IEEE 1284) during
a remote ROM update. This setting is reset to zero after the machine is cycled off and on.
Allows the technician to upgrade the firmware using a parallel cable.
[0 to 1/0/1]
0: Not allowed, 1: Allowed
5857 Save Debug Log CTL
1
On/Off (1:ON 0:OFF)
Switches the debug log feature on and off. The debug log cannot be captured until this
feature is switched on.
0: OFF, 1: ON
2
Target (2: HDD 3: SD)
Selects the storage device to save debug logs information when the conditions set with
SP5-858 are satisfied.
[ 2 to 3/2/1 /step]
2: HDD, 3: SD Card
5
Save to HDD
Saves the debug log of the input SC number in memory to the HDD.
A unique file name is generated to avoid overwriting existing file names on the SD Card.
Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one by one to
each SD Card.
6
Save to SD Card
Saves the debug log of the input SC number in memory to the SD card.
2. Appendix 2: Service Program Mode
200