Ricoh Mo-C1, Service Manual, Page: 646 / 1052

If the machine shows SC codes for HDD errors (SC860 to SC865) with SC 925, do the recovery
procedures for SC860 to SC865.
Procedure 2
If the machine does not show one of the five HDD errors (SC860 to SC865), turn the machine power off
and on. If this is not the solution for the problem, then initialize the NetFile partition on the HDD with
SP5832-011 (HDD Formatting – Ridoc I/F).
NetFiles: Jobs printed from the document server using a PC and DeskTopBinder
• Before you initialize the NetFile partition on the HDD, tell the customer that:
• Received faxes on the delivery server will be erased
• All captured documents will be erased
• DeskTopBinder/Print Job Manager/Desk Top Editor job history will be erased
• Documents on the document server, and scanned documents, will not be erased.
• The first time that the network gets access to the machine, the management information must be
configured again (this will use a lot of time).
Before you initialize the Netfile partition with SP5832-011, do these steps:
1. Go into the User Tools mode and do "Delivery Settings" to print all received fax documents that are
scheduled for delivery. Then erase them.
2. In the User Tools mode, do Document Management> Batch Delete Transfer Documents.
3. Do SP5832-011, then turn the machine power off and on.
Procedure 3
If "Procedure 2" is not the solution for the problem, do SP5832-001 (HDD Formatting – All), then turn
the machine power off and on.
SP5832-001 erases all document and address book data on the hard disks. Ask the customer before
you do this SP code.
Procedure 4
If "Procedure 3" is not the solution for the problem, replace the HDD.
6. Troubleshooting
644