Ricoh Mo-C1, Service Manual, Page: 415 / 1052

6. A message prompts you to cancel or do any adjustment. Check the test pattern.
• If the pattern is acceptable, touch [Cancel].
• If adjustment is required touch [Adjustment] page 538
7. Exit the User Tools and execute SP5884-003 (Factory Setting – Head Gap Backup) to save the
adjusted settings.
8. Exit the SP mode.
9. Remove the accessory ink cartridges and replace them with the customer's ink cartridges.
10. Remove the accessory ink collector tank and replace it with the customer's ink collector tank.
After Replacement of the Black Print Head Unit
This procedure is done only after replacement of the black print.
1. Go into the SP mode and open SP2902.
2. Select Pattern 11 Density Pattern 2, and then touch [OK].
3. At the top of the screen, touch [COPY Window].
4. On the Copy Window screen, select [High Speed Copy].
5. Touch the icon for Paper Input 1 (Roll 1).
6. Feed one sheet of A4 SEF paper into the scanner unit, and then press [Start] to print the pattern.
Carriage Unit
413