Ricoh Mo-C1, Service Manual, Page: 899 / 1052

This SP must be executed immediately after installation of an HDD unit in a basic
machine that previously had no HDD. The first time the machine is powered on with the
new HDD installed, the system automatically takes the address book from the NVRAM
and writes it onto the new HDD. However, the new address book on the HDD can be
accessed only by the system administrator at this stage. Executing this SP by the service
technician immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install a new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
However, at this point the address book can be accessed by only the system
administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes successfully, any user
can access the address book.
43 Addr Book Media
Displays the slot number where an address book data is in.
[0 to 30/- /1]
• 0: Unconfirmed
• 1: SD Slot 1
• 2: SD Slot 2
• 4: USB Flash ROM
• 20: HDD
• 30: Nothing
47 Initialize Local Addr Book
Clears the local address book information, including the user code.
48 Initialize Delivery Addr Book
Clears the distribution address book information, except the user code.
49 Initialize LDAP Addr Book
Clears the LDAP address book information, except the user code.
50 Initialize All Addr Book
Clears all directory information managed by UCS, including all user codes.
SP5000
195