Ricoh Mo-C1, Service Manual, Page: 409 / 1052

5. Touch "Maintenance" > "Manual Adjust Print Head Position" > "Target Location: Paper Input
Location 1" > Print Quality: Standard > Start Printing. The message asks you to wait while the
pattern is printing.
• Only the first three rows of the pattern will print because the print heads are at maximum
height.
6. A message prompts you to cancel or do any adjustment. Check the test pattern.
• If the pattern is acceptable, touch [Cancel].
• If adjustment is required touch [Adjustment] page 538
7. Touch [Exit] twice and do the next adjustment.
Adjustment 2
1. Touch > "System Settings" > "Input Paper Settings" tab > [Next] > "Paper Type Paper Input 1".
2. Touch "Coated Paper" and "Plain Paper" and then touch [OK].
3. Touch [Previous].
Carriage Unit
407