Ricoh M160, Service Manual

Page: 508 / 836

Main SP Tables-5
SM Appendix 3-95 M160/M161
Ap
p
en
d
ices:
S
P
M
o
d
e T
ab
les
5-816-003 Function Flag C*
[0 or 1 / 0 / 1/step]
0: Disabled
1: Enabled
Enables or disables the remote service
function.
NOTE : This SP setting is changed to "1"
after @Remote register has been
completed.
5-816-007 SSL Disable C*
[0 or 1 / 0 / 1/step]
0: No. SSL used.
1: Yes. SSL not used.
Controls if RCG (Remote Communication
Gate) confirmation is done by SSL during
an RCG send for the @Remote over a
network interface.
5-816-008 RCG Connect Timeout C*
[1 to 90 / 30 / 1second/step]
Sets the length of time (seconds) for the
time-out when the RCG (Remote
Communication Gate) connects during a
call via the @Remote network.
5-816-009 RCG Write Timeout C*
[0 to 100 / 60 / 1second/step]
Sets the length of time (seconds) for the
time-out when sent data is written to the
RCG during a call over the @Remote
network.
5-816-010 RCG Read Timeout C*
[0 to 100 / 60 / 1second/step]
Sets the length of time (seconds) for the
timeout when sent data is written from the
RCG during a call over the @Remote
network.
5-816-011 Port 80 Enable C*
[0 or 1 / 0 / 1/step]
0: No. Access denied
1: Yes. Access granted
Controls if permission is given to get
access to the SOAP method over Port 80
on the @Remote network.