Ricoh M160 Service Manual Download Page 111

Page: 111 / 836

Settings for @Remote Service

2-81

M160/M161

Ins

lla

2.21.2 EXECUTE THE @REMOTE SETTINGS

1. Enter the SP mode.

2. Input the Request number which you have obtained from @Remote Center GUI, and

then enter [OK] with SP5816-202.

3. Confirm the Request number, and then click [EXECUTE] with SP5816-203.

4. Check the confirmation result with SP5816-204.

Value

Meaning

Solution/ Workaround

Succeeded

Communication error (proxy

enabled)

Check the network condition.

Communication error (proxy

disabled)

Check the network condition.

Proxy error (Illegal user name or

password)

Check Proxy user name and password.

Communication error

Check the network condition.

Other error

See "SP5816-208 Error Codes" below

this.

Request number confirmation

executing

Processing… Please wait.

Request number error (Data is

already registered under this

number.)

Check the request number again.

Request number error (invalid

parameter)

Check the request number again.

5. Make sure that the screen displays the Location Information with SP5816-205 only

when it has been input at the Center GUI.

6. Click [EXECUTE] to execute the registration with SP5816-206.

7. Check the registration result with SP5816-207.

Summary of Contents for M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands

Ricoh M160, Service Manual

Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands