Ricoh M160 Service Manual Download Page 125

Page: 125 / 836

General Cautions

4-1

M160/M161

Rep

lacemen

nd A

jus

4. REPLACEMENT AND ADJUSTMENT

4.1 GENERAL CAUTIONS

4.1.1 NOTES ON THE MAIN POWER SWITCH

The main power button of this machine has been changed to a push-button switch (push button)

from the conventional rocker switch. The push switch has characteristics and specifications

different from the rocker switch. Care must be taken when replacing and adjusting parts.

Characteristics of the Push Switch (DC Switch)

Power is supplied to the machine even when the main power switch is turned OFF.

The push switch in this machine uses DC (direct current). Therefore, if the AC power cord is

connected to an electrical outlet, power is supplied to the controller board, the operation unit

and other modules even when the main power is turned OFF. When replacing the controller

board and the operation unit in this state, not only these boards, it will damage other electrical

components.

So, when performing maintenance work such as replacing parts, in addition to turning off the

main power with the push switch, always unplug the AC power cord.

When you disconnect the power cord from the AC wall outlet, inside the machine there is

still residual charge.

When you disconnect the power cord from the AC wall outlet, inside the machine for a while

there is still residual charge. Therefore, if you remove boards in this state, it can cause a

blown fuse or memory failure.

--How to remove the residual charge inside the machine--

After you unplug the power cord from the AC wall outlet, in order to remove the residual

charge from inside the machine, be sure to press the main power switch. Thus, the charge

remaining in the machine is released, and it is possible to remove boards.

When you reconnect the AC power cord into an AC wall outlet, the machine will start

automatically.

In order to remove the residual charge, push the main power switch while you disconnect the

AC power cord. At that time, the power ON flag inside the machine is set. Therefore, after you

finish work on the machine and reconnect the power cord to the AC, even if you do not press

the main power switch, the machine will start automatically and the moving parts will begin to

move. When working on moving parts, be careful that fingers or clothes do not get caught.

Summary of Contents for M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands

Ricoh M160, Service Manual

Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands