Ricoh M160 Service Manual Download Page 294

Page: 294 / 836

Service Call

M160/M161

6-50

SC No.

Level

Error Name/Error Condition/Major Cause/Solution

SC859-01

Data encryption conversion HDD conversion error (HDD check

error)

HDD was not converted correctly during an attempt to update

the encryption key.

Only an error screen is displayed and no SC is issued during

conversion. This SC is issued after machine restarts.



HDD conversion was selected in the Encryption key update

function but the machine was turned on with the HDD

removed.



Power failure occurred during encryption key update.



HDD was not successfully converted during encryption key

update due to HDD errors or cable noises.



Check HDD connection.



Format the HDD.



If there is a problem with the HDD, it has to be replaced.

SC No.

Level

Error Name/Error Condition/Major Cause/Solution

SC859-02

Data encryption conversion HDD conversion error (Power failure

during conversion)

HDD was not converted correctly during an attempt to update

the encryption key.

Only an error screen is displayed and no SC is issued during

conversion. This SC is issued after machine restarts.

Details:

NVRAM/HDD conversion is incomplete.

Power failure occurred during encryption key update.

None

The display after the restarting instructs the user to format the

HDD.

Summary of Contents for M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands

Ricoh M160, Service Manual

Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands