Ricoh M160 Service Manual Download Page 371

Page: 371 / 836

Energy Save

7-3

M160/M161

erg

y S

ave

Fusing Off Mode

(System settings > Timer Settings > Fusing Unit Off Mode (Energy Saving) On/Off)

Fusing Unit Off Mode (Energy Saving) On/Off

The user can specify whether the machine enters Fusing Unit Off Mode or not.

When the machine is in Fusing Unit Off Mode, the display is on but the fusing unit is off to

save energy.

Default: Off



The user can specify when to exit Fusing Unit Off Mode and the time to elapse before

entering Fusing Unit Off Mode.



Off

Turns off Fusing Unit Off Mode.

Exit Fusing Unit Off Mode

The user can specify the condition for the printer to exit Fusing Unit Off Mode.

Default: On Printing



On Printing

The machine exits Fusing Unit Off Mode when printing is performed.



On Operating Control Panel

The machine exits Fusing Unit Off Mode when a key other than the copy function key is

pressed on the control panel of the machine.

If printing is performed with the copy function or a key in the copy function is pressed on

the control panel of the machine, the machine exits Fusing Unit Off Mode regardless of

this setting.

Fusing Unit Off Mode Timer

Set the time from 10 seconds to 240 minutes, using the number keys.

Default: 10 seconds (10 seconds - 240 minutes)

Return to Stand-by Mode

Sleep Mode

Recovery time: 9 sec.

Summary of Contents for M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands

Ricoh M160, Service Manual

Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands