Ricoh M160 Service Manual Download Page 246

Page: 246 / 836

Service Call

M160/M161

6-2

6.2 SERVICE CALL

6.2.1 SUMMARY

Level

Definition

Reset Procedure

To prevent damage to the machine, the main

machine cannot be operated until the SC has

been reset by a service representative (see the

note below).

Enter SP mode, go into

SP5-810-001, press

[Execute], and turn the main

power switch off and on.

SCs that disable only the features that use the

defective item. Although these SCs are not

shown to the user under normal conditions, they

are displayed on the operation panel only when

the defective feature is selected.

Turn the main power switch

off and on.

The SC history is updated. The machine can be

operated as usual.

The SC will not be

displayed. Only the SC

history is updated.

Turning the main power switch off then on resets

SCs displayed on the operation panel. These are

re-displayed if the error occurs again.

Turn the main power switch

off and on.

When a Level “D” SC code occurs

When a Level D SC occurs, a screen opens on the operation panel to tell the operator:



An error occurred



The job in progress will be erased



The machine will reboot automatically after approximately 30 seconds.

The operator can wait until the machine reboots automatically or touch “Reset” on the screen to

reset the machine immediately and go back to the copy screen.

Summary of Contents for M160





































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands

Ricoh M160, Service Manual

Search results

Summary of Contents for M160

Reviews:

Related manuals for M160

Brands by name

Popular brands