Ricoh DD 5450, Field Service Manual, Page: 72 / 403

２
70
Chapter 2 Tape Dispenser Type D1
4. Press the key to save the set value.
Default is 28.
5. AB: Small classification tape length
(unit: cm)
3. Set the tape length of “5 (for small
classification)” using the NUMERIC keys.
You can set from 23 to 50.
REFERENCE
(7) Setting Different Tape Length for Large
and Small Classification (Type D)
1. ABC: 011 (enabled)
2. A: 0 (Tape insertion after printing)
B: 0 (Tape cut timing : After detecting
the trail edge of the paper)
C: 1 (Large/small classification mode.
Enabled only when printing is
OFF.)
D: 1 (Online classification enabled)
E: 1 (Online large classification
mode. Enabled only when
printing is OFF.)
F: 1 (Double feed classification tape
enabled)
G: 1 (Double feed large classification
mode. Enabled only when
printing is OFF.)
H: 0 (No tape insertion after printing)
1. Turn on the power to the machine in HELP
mode.
Access HELP mode HELP-071.
Set “HELP-071-2: 00111110”.
REFERENCE
You can adjust the tape length both in large
classification and small classification.
6