Ricoh DD 5450, Field Service Manual, Page: 378 / 403

376
８
Chapter 8 HELP Mode Function and Operation Procedures
● Setting the Margin
● Operation procedure
Setting the Margin
HELP-068
1.
Call the HELP mode “H-068”.
0 5
1.
0 2
2.
0 2
3.
0 4
4.
0 4
5.
HELP-068
0 5
1.
0 2
2.
0 2
3.
0 4
4.
0 4
5.
2. Setting.
3.
Return to the HELP mode.
HELP-068
0 5
1.
0 2
2.
0 2
3.
0 4
4.
0 4
5.
Setting
1. Select and touch the item to be set.
2. Use the NUMERIC keys to enter value for the
desired range.
3. Press the
X
=
key to store the set values.
► Setting function
No. Default Range Content
1 5mm 2mm-7mm Lead edge margin(adjusted by 1 mm)
2 2mm 2mm-7mm Trail edge margin(adjusted by 1 mm)
3 2mm 2mm-7mm Side margin (horizontal direction) (adjusted
by 1 mm)
4 4mm 4mm-14mm
Multiple exposure: Margin of Horizontal reading
center) (adjusted by 1 mm)
5 4mm 4mm-14mm Multiple exposure: Margin of vertical reading center)
adjusted by 1 mm)
If you desire to adjust the setting value of;
•H-042-3: Scan lead edge start position
•H-043-3: ADF lead edge start position
when printing in multiple exposure setting, it is required
to reset to the default value of 'H-068-5: Setting margin of
multiple exposure (vertical reading center)' at first.
Enter “ 068 ” by the NUMERIC keys and then press the
PRINT key.
→ To exit the HELP mode : Turn the power switch OFF.
→ To access another HELP mode : Enter the desired mode number
using the numeric keys.
Press the STOP key. The HELP mode selection display will reappear.
IMPORTANT:
3