323
８
Chapter 8 HELP Mode Function and Operation Procedures
● Check operation.
MASTER FEED STEPPING MOTOR / EJECT MOTOR /
CLAMP MOTOR / CLAMP MOTOR & EJECT MOTOR /
CUTTER MOTOR
1.
●
Operation procedure
Adjusting/Checking Operation
HELP-019
Call the HELP mode “H-019”.
2.
Enter “
019
” by the
NUMERIC
keys and then press the
key. When HELP-019 is entered, the thermal head moves up
and the ink roller moves down.
Check operation.
1. Select and touch the motor or clutch to be checked.
2. Press the
PRINT POSITION
key :
while this key is held down, the motor operates.
3. Every time the MASTER MAKING key is pressed, the clamp moves to B mode position and the
drum rotates and then stops at the detach position, the attach position and the drum removal
position, in order. Press the TEST PRINT key. The master is set. Press the HOME key.
The master is fed to the attach position and is cut. (The clamp can be confirmed.)
Press the paper eject switch. The clamp is in B mode and the drum rotates.
Press the "
1"
key. Every time this key is pressed, the drum rotates and stops at the
detach position.
Press the "
2"
key. Every time this key is pressed, the drum rotates and stops at the
attach position.
Press the "
3"
key. Every time this key is pressed, the drum rotates and stops at the
removal position.
Press the "
4"
key. Every time this key is pressed, the drum rotates and stops at the
pre-detach position.
Press the "
5"
key. Every time this key is pressed, the drum rotates and stops at the
post-detach position.
When selecting CLAMP MOTOR/EJECT MOTOR :
The eject motor operates only when the clamp is moved toward C mode direction by pressing the
PRINT POSITION
key.
However, the eject motor does not operate when the clamp is moved toward B mode by pressing the
PRINT POSITION
key.
3.
OPERATION TEST
MASTER FEED STEPPING
EJECT MOTOR
CLAMP MOTOR
CLAMP MOTOR & EJECT MOTOR
MASTER FEED STEPPING & CLUTCH
CUTTER MOTOR
HELP-019
HELP-019
HELP-016 to HELP-018 unused
Return to the HELP mode.
Press the
STOP
key.
The HELP mode selection display will reappear.
→
To exit the HELP mode : Turn the power switch OFF.
→
To access another HELP mode : Enter the desired mode number
using the numeric keys.
OPERATION TEST
MASTER FEED STEPPING
EJECT MOTOR
CLAMP MOTOR
CLAMP MOTOR & EJECT MOTOR
MASTER FEED STEPPING
& CLUTCH
CUTTER MOTOR
OPERATION TEST
MASTER FEED STEPPING
EJECT MOTOR
CLAMP MOTOR
CLAMP MOTOR & EJECT MOTOR
MASTER FEED STEPPING
& CLUTCH
CUTTER MOTOR
3
Summary of Contents for DD 5450
