Ricoh DD 5450, Field Service Manual, Page: 204 / 403

202
４
Chapter 4 Paper Feed Section
● Reinstall the paper feed roller so that the
hexagon socket set screw is positioned at the
paper feed roller shaft's counter bore.
● Do not use an old paper feed roller together
with a new one.
(4) Removing the Paper separator Unit
1. Pull the clip on the right side of the right paper
feed roller toward you.
2. Slightly lift up the shaft as shown in the right
figure and move the right paper feed roller
and the center paper feed roller to the right
side.
3. Remove the Paper separator unit.
● Take note of the direction to install the
Paper separator unit.
● After reinstalling the Paper separator unit,
adjust its clearance.
2. Loosen the hexagon socket set screw to
remove the paper feed roller.
3. Remove the stopper to remove the two paper
feed rollers.
Reinstallation
Reinstallation
Hexagon socket
set screw
Paper feed roller
Paper feed roller
Stopper
→See Page
158
4
IMPORTANT
IMPORTANT