Ricoh DD 5450, Field Service Manual, Page: 312 / 403

310
８
Chapter 8 HELP Mode Function and Operation Procedures
Page 1:
● Check operation.
PAPER EJECT STEPPING / PAPER EJECT FAN / PRINT TRAY
FAN / TOP FAN
● Checking sensor.
PAPER EJECT JAM SENSOR
1.
● Operation procedure
(1) Adjusting/Checking the Paper Eject Section
(3 pages in total)
HELP-007
PAPER EJECT SECTION
Call the HELP mode “H-007”.
2.
3.
Enter “ 007 ” by the NUMERIC keys and then press the
PRINT key.
Check operation.
Check operation.
Checking sensor.
Check the following sensor.
► Status of Sensor
Sensor 0 1
PAPER EJECT JAM SENSOR Present Not present
1 :PAPER EJECT JAM SENSOR
PAPER EJECT STEPPING
Step
4.
→ Press the STOP key. The HELP mode selection display will reappear.
PAPER EJECT FAN
PRINT TRAY FAN
TOP FAN
HELP-007
HELP-007
PRINT TRAY FAN
HELP-007
PRINT TRAY FAN
1. Select and touch the motor or fan to be checked.
2. When selecting motor/fan:
Press the PRINT POSITION key;
while this key is held down, the motor/fan rotates.
PAPER EJECT SECTION
PAPER EJECT STEPPING
PAPER EJECT FAN
TOP FAN
1 :PAPER EJECT JAM SENSOR
PAPER EJECT SECTION
PAPER EJECT STEPPING
PAPER EJECT FAN
TOP FAN
1 :PAPER EJECT JAM SENSOR
PAPER EJECT SECTION
PAPER EJECT STEPPING
PAPER EJECT FAN
TOP FAN
1 :PAPER EJECT JAM SENSOR
PRINT TRAY FAN
3