Ricoh DD 5450, Field Service Manual, Page: 385 / 403

383
８
Chapter 8 HELP Mode Function and Operation Procedures
DHCP
RARP
IP ADDRESS
SUB NET MASK
DEFAULT GATEWAY
3.
Advanced set-up
HELP-072
ENABLE
DISABLE
ADVANCED SET-UP
OK
ENABLE
DISABLE
000 000 000 000
000 000 000 000
000 000 000 000
1. Select and touch
ENABLE/ DISABLE
on DHCP. (You can also select by pressing
the TEST PRINT key.)
2. Select and touch
ENABLE
/
DISABLE
on RARP . (You can also select by pressing
the TEST PRINT key.)
3. Touch the place to enter and then enter the value of IP address
with NUMERIC keys .
4. Touch the place to enter and then enter the value of SUB NET
MASK with NUMERIC keys .
5. Touch the place to enter and then enter the value of DEFAULT
GATEWAY with NUMERIC keys .
6. Touch "OK" (or press the
X
=
key.) The setting is sent to FS-100U.
HELP-072
YES NO
NETWORK
INITIALIZE?
Initialize
1. Select and touch YES/NO. (You can also select by pressing
the
X
=
key.)
● Touch "YES". FS-100U is initialized. (same as factory setting)
4. Return to the HELP mode.
Press the STOP key. The HELP mode selection display will reappear.
→ To exit the HELP mode : Turn the power switch OFF.
→ To access another HELP mode : Enter the desired mode number
using the numeric keys.
NETWORK
3