Ricoh DD 5450, Field Service Manual, Page: 202 / 403

200
４
Chapter 4 Paper Feed Section
4 Paper Feed Section
(1) Removing the Feed Tray Unit
1. Hold the bottom of the feed tray unit and
remove the connector. Then remove the feed
tray upward.
(S tight hexagon head WH rounded end screw
3 x 6)
The following electric components can be
removed.
< All models >
● Paper sensor
< How to Install >
1. Turn the potentiometer of the cable unit until stop
position in the direction of clockwise.
● Do not turn the potentiometer excessively.
It may cause the machine to malfunction.
2. Return the tooth of the pulley for 2 nothes from
the stop position.
3. Slide the side guides to both ends and install the
bracket.
4. Install the feed tray to the printer.
● Be sure to adjust the paper width with the HELP
Mode “HELP-006”.
Reinstallation
HELP-006 →See Page 308
Connector
Feed tray
Bracket
Pulley
Potentiometer
Slide the side guides to
both ends.
4
IMPORTANT
IMPORTANT
REFERENCE
Paper sensor