Ricoh DD 5450, Field Service Manual, Page: 215 / 403

４
213
Chapter 4 Paper Ejection Section
(4) Removing the Paper Ejection Belt
1. Remove the paper ejection base.
2. Remove the timing belt.
3. Remove the two screws to remove the Static
eliminating bracket.
(Ultra low head screw 3 x 6)
4. Remove the two screws to remove the Z of the
jump plate.
(Pan head screw with spring plain washer 4 x
12)
5. Remove the two nuts.
6. Remove the two screws to remove the jump
plate.
(Truss head screw 4 x 10)
● Do not loose the collars.
7. Remove the four screws to remove the angles.
(P tight pan head WH screw 3 x 8)
Timing belt
Static eliminating
bracket
Screw
Screw
Screw
Screw
Screw Screw Screw Screw
Jump plate Jump plate
→See (3) above
6
Screw
Screw
IMPORTANT
Nut
Collar
Angle
Nut
Collar
Angle