Ricoh DD 5450, Field Service Manual, Page: 299 / 403

297
８
Chapter 8 HELP Mode Function and Operation Procedures
Mode Name: Resolution
● Serial Number
● Date and Time
● Main PCB Version / Panel PCB Version /Relay PCB Version /
Tape Dispenser ROM Version
(Only when the tape dispensers is installed)
● Service Call Contact Number (if available)
1.
● Operation procedure
ROM Version Display
HELP-000
VERSION
Call the HELP mode “H-000”.
2.
3.
Enter “ 000 ” by the NUMERIC keys and then press the
PRINT key.
Check the display.
Check the ROM version displayed.
Return to the HELP mode.
Press the STOP key.
The HELP mode selection display will reappear.
→ To exit the HELP mode : Turn the power switch OFF.
→ To access another HELP mode : Enter the desired mode number
using the numeric keys.
DP:400x400
0000000:0000000000
2014/03/17 Mon.12:12:12
MAIN PCB Version:1.* *
PANEL PCB Version:1. * *
RELAY PCB Version:1.* *
TAPE DISPENSER PCB Version:1.* *
0900000000
Mode Name: Resolution
Serial Number
Date and Time
Main PCB Version
Panel PCB Version
Relay PCB Version
Tape Dispenser ROM Version*
(Only when the tape dispensers is installed)
HELP-000
HELP-000
VERSION
DP:400x400
0000000:0000000000
2014/03/17 Mon.12:12:12
MAIN PCB Version : 1. * *
PANEL PCB Version : 1. * *
RELAY PCB Version:1.* *
TAPE DISPENSER PCB Version : 1. * *
0900000000
VERSION
DP:400x400
0000000:0000000000
2014/03/17 Mon.12:12:12
MAIN PCB Version : 1. * *
PANEL PCB Version : 1. * *
RELAY PCB Version:1.* *
TAPE DISPENSER PCB Version : 1. * *
0900000000
● HELP Mode Descriptions
3