Ricoh BizWorkz 106 Operation Manual Download Page 88

Page: 88 / 422

COPYING

Carefully insert the document stack
face-down into the ADF.

Note

The side of the original to be copied should
be face down.

Insert the stack of originals along the
document guide into the ADF.

Note

Insert your stack of originals into the ADF
until it stops. If you do not push it right in,
the machine will not detect the stack.

Make sure the upper tray extension is
pulled out.

Press

to perform the copy opera-

tion.

Note

• If your original jams while being fed into

the ADF, press

to cancel the opera-

tion. See page 90 for how to clear the jam.

GS10(GB)_Chapter 05_p69-75

99.8.3, 1:38 PM

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Search results

Summary of Contents for BizWorkz 106

Reviews:

Ricoh BizWorkz 106, Operation Manual, Page: 88 / 422

Search results

Summary of Contents for BizWorkz 106

Reviews: