manualshive.com logo in svg

Ricoh BizWorkz 106, Operation Manual, Page: 215 / 422

Share
Download
Ricoh BizWorkz 106 Operation Manual Download Page 215

iii

 

CAUTION:

• Keep the machine away from humidity and dust. A fire or an electric shock

might occur.

• Do not place the machine on an unstable or tilted surface. If it topples over,

it could cause injury.

• When you move the machine, unplug the power cord from the wall outlet to

avoid fire or electric shock.

• When the machine is not be used for a long time, unplug the power cord.

• When you pull out the plug from the socket, grip the plug to avoid damaging

the cord and causing fire or electric shock.

• If you use the machine in a confined space, make sure there is a continuous

air turnover.

• Do not reuse stapled paper. Do not use aluminium foil, paper containing

carbon or any other conductive paper. Otherwise, a fire might occur.

• When removing misfed paper, or replacing the toner cassette and the clean-

ing pad, do not touch the fusing section because it could be very hot.

• This machine has been tested for safety using this supplier’s parts and

consumables. We recommend you only use these specified supplies.

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Reviews:

No comments