manualshive.com logo in svg

Ricoh BizWorkz 106, Operation Manual, Page: 339 / 422

Share
Download
Ricoh BizWorkz 106 Operation Manual Download Page 339

31

FAXING

4. F

AXING

 Note

Some special characters in lower case appear identical in upper case on the
display due to space limitations. These characters are printed correctly on lists
and reports.

Deleting Characters and Moving the Cursor

When entering names and storing numbers:

•

To delete the character to the left of the cursor, press  

.

 Note

If the cursor is at the far left of the display, pressing 

 deletes the whole name

and number.

•

To move the cursor left, press the 

 key.

•

To move the cursor right, press the 

 key.

b(GB)6.5_Chapter 04_p29-39

99.8.3, 1:14 PM

31

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Reviews:

No comments