manualshive.com logo in svg

Ricoh BizWorkz 106, Operation Manual, Page: 106 / 422

Share
Download
Ricoh BizWorkz 106 Operation Manual Download Page 106

88

TROUBLESHOOTING

Clearing a Paper Misfeed

This section describes how to clear a paper misfeed when one occurs.

CAUTION

When removing misfed paper, do not touch the fusing
section because it could be very hot.

 Important!

Hold a misfed sheet with both hands and slowly pull it out.  Do not use a tool, such
as a screwdriver or tweezers as this may damage the unit.

 Note

If “Clear Paper” is still displayed after you clear the jam, there may be paper
jammed in another part of the machine. Check all areas described in this section

1

1

Raise the document trap.

2

Lift up the tabs located on the sides
of the machine and open the front
unit.

2

Pull out the toner cassette.

 Note

• Be sure to hold the toner cassette by its handle.
• Keep the toner cassette horizontal to avoid

spilling the toner.

Clearing a Feed in the Main Unit

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Reviews:

No comments