Ricoh BizWorkz 106 Operation Manual Download Page 401

Page: 401 / 422

TROUBLESHOOTING

6. TROUBLE-

SHOOTING

Clearing a Misfeed in the ADF

Open the ADF cover.

Note

Be sure to open the ADF cover before pulling
out the misfed original. Failure to do so can
result in damage to the original.

Pull out the misfed original.

Close the ADF cover, and make sure it
locks securely into place.

Important!

If copying was in progress, be sure to specify
the desired copy quantity again.

Clearing a Misfeed in the Optional Paper Feed Unit

Pull out the paper tray.

Pull out the misfed paper.

b(GB)6.5_Chapter 06_p82-95

99.8.3, 1:18 PM

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Search results

Summary of Contents for BizWorkz 106

Reviews:

Ricoh BizWorkz 106, Operation Manual, Page: 401 / 422

Search results

Summary of Contents for BizWorkz 106

Reviews: