Ricoh BizWorkz 106 Operation Manual Download Page 272

Page: 272 / 422

TROUBLESHOOTING

Area 3 or 4

Open the ADF cover.

Note

Be sure to open the ADF cover before pulling
out the misfed original. Failure to do so can
result in damage to the original.

Pull out the misfed original.

Close the ADF cover, and make sure it
locks securely into place.

Important!

If copying was in progress, be sure to specify the desired copy quantity again.

Paper feed unit

Use the following procedure when the misfed paper cannot be removed
using the procedure on page 43 (for Type 1) or page 45 (for Type 2).

Pull out the paper tray.

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Search results

Summary of Contents for BizWorkz 106

Reviews:

Ricoh BizWorkz 106, Operation Manual, Page: 272 / 422

Search results

Summary of Contents for BizWorkz 106

Reviews: