Ricoh BizWorkz 106 Operation Manual Download Page 175

Page: 175 / 422

COPYING

Reduction and Enlargement

Press

to select preset reduction or enlargement factors for

the copy operation.

To set the reduction factor

Lift the platen cover (

). Place the

original face down at the arrow mark
on the scale (

). Close the platen

cover (

Press

until the desired size ra-

tio appears. The sizes change in the fol-
lowing order.

100%

→

93%

→

87%

→

82%

50%

←

“71% A4 A5”

Press

to perform the copy op-

eration.

Note

Press

to clear the setting after

copying.

100% 01

Ratio (%)

Original

➝

Paper size

A little reduced.

➝

Reduced by

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Search results

Summary of Contents for BizWorkz 106

Reviews:

Ricoh BizWorkz 106, Operation Manual, Page: 175 / 422

Search results

Summary of Contents for BizWorkz 106

Reviews: