manualshive.com logo in svg

Ricoh BizWorkz 106, Operation Manual

Share
Download
Ricoh BizWorkz 106 Operation Manual Download Page 236

12

GETTING ACQUAINTED

To load small size paper

 Note

We recommend that you always feed small size paper vertically, with one of its
shorter edges feeding into the machine.

1

Remove all paper before loading small
size paper in the upper paper tray.

2

Open the small panel on the back of
the machine by unlatching it as shown
in the illustration. Opening the small
panel makes it easy to handle small size
paper.

3

Set paper into the upper paper tray.
Make sure that the top of the stack is
not higher than the limit mark on the
tray guide.

Unlatch Here

4

After setting the paper into the tray, raise
the small panel until it snaps securely
into place.

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands