Ricoh BizWorkz 106 Operation Manual Download Page 201

Page: 201 / 422

TECHNICAL REFERENCE

02:0010 000

Selecting 300 dpi or 600 dpi

Set the printer to 300 dpi if the designated output is not obtained when
printing using a DOS application compatible with the 300 dpi PCL printer.

Prt Help List

O K

3 User param.

Press

. “Prt Help List” ap-

pears.

Press

until “3

User Param.” appears. The messages
change in the following order.

1 Tray Pap. Size

3 User Param.

2 Language

Press

and press

move the flashing block cursor until it
appears in the position shown in the
illustration to the right.

Note

The bits other than the one highlighted in the
illustration are unrelated to this setting.

Press

to change the setting to 1 or

0, as desired.

Display

Heater status

02:0010 0000

600 dpi (default setting)

02:0010 1000

300 dpi

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Search results

Summary of Contents for BizWorkz 106

Reviews:

Ricoh BizWorkz 106, Operation Manual, Page: 201 / 422

Search results

Summary of Contents for BizWorkz 106

Reviews: