manualshive.com logo in svg

Ricoh BizWorkz 106, Operation Manual, Page: 406 / 422

Share
Download
Ricoh BizWorkz 106 Operation Manual Download Page 406

98

USER MAINTENANCE

4

Remove the old cleaning pad.

 

 Note

Be sure to grasp the green handle when re-
moving the cleaning pad.

5

Grasp the new cleaning pad by the green
handle and insert it into place.

6

Press down gently but firmly on both
sides of the pad to make sure that it is
inserted as far as it can go.

Do not forget to install the cleaning
pad whenever you install a new toner
cassette.

7

Prepare the new toner cassette. Hold-
ing the toner cassette by its handle, gen-
tly shake it side to side 5 or 6 times to
evenly distribute the toner inside.

 

 Note

Be sure to hold the toner cassette by its handle.

3

Hold the toner cassette by its handle and
pull it out.

 Note

Keep the toner cassette horizontal to avoid
spilling the toner.

b(GB)6.5_Chapter 07_p96-100

99.8.3, 1:18 PM

98

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Reviews:

No comments