manualshive.com logo in svg

Ricoh BizWorkz 106, Operation Manual

Share
Download
Ricoh BizWorkz 106 Operation Manual Download Page 321

GETTING ACQUAINTED

2. GETTING

ACQUAINTED

13

Loading Small Size Paper

 Note

We recommend that you always feed small size paper vertically with the shorter
edge feeding into the machine first.

1

Remove all paper before loading small
size paper in the upper paper tray.

2

Open the small size paper feed access
panel on the back of the machine by
unlatching it as shown in the illustra-
tion. Opening the small panel makes it
easy to handle small size paper.

3

Set paper into the upper paper tray.
Make sure that the top of the stack is
not higher than the limit mark on the
tray guide.

Unlatch Here

4

After setting the paper into the tray, raise
the small panel until it snaps securely
into place.

b(GB)6.5_Chapter 02_p10-24

99.8.3, 1:13 PM

13

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands