Ricoh BizWorkz 106 Operation Manual Download Page 34

Page: 34 / 422

GETTING ACQUAINTED

Second (Additional) Printer

This machine features a port for connecting a second printer. When con-
nected, press the

key to switch between the two printers.

Note

Make sure that the power of your computer is turned off before making the con-
nection.

Connecting to a Second Printer

Turn off both the machine and your sec-
ond printer.

Connect one end of a parallel interface
cable to your second printer.

Connect the other end of the cable to
the second printer port, securing it in
place with the screws.

Note

• Only use a standard IEEE 1284 compliant

36-pin parallel cable.

☛

Using the second printer, see page 28.

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Search results

Summary of Contents for BizWorkz 106

Reviews:

Ricoh BizWorkz 106, Operation Manual, Page: 34 / 422

Search results

Summary of Contents for BizWorkz 106

Reviews: