Ricoh BizWorkz 106 Operation Manual Download Page 377

Page: 377 / 422

FAXING

4. F

AXING

51 Select

O K

Function no.: _ _

Mode: Off?

O K

Mode: On?

O K

Summer Time

O K

Registered

5 Select

O K

Prt Help List

Press

until the

setting you wish to change appears on
the display.

E.g. press

once.

Press

to adjust

the change.

Press

. The display opposite will

flash briefly on the display and then the
function menu will reappear.

Note

Do not carry out any operations while “Reg-
istered” appears on the display.

Do one of the following:

• Enter another function number.
• Press

to return to standby mode.

Page Header

O K

b(GB)6.5_Chapter 04_p66-69

99.8.3, 1:17 PM

Summary of Contents for BizWorkz 106







































































































































































































































































































































































































































Search results

Summary of Contents for BizWorkz 106

Reviews:

Ricoh BizWorkz 106, Operation Manual, Page: 377 / 422

Search results

Summary of Contents for BizWorkz 106

Reviews: