Ricoh Aficio 6010 Page 240 Operating Instructions Manual Download

Page: 240 / 282

224

35mm Strip Negative

Press the [Shading] key.

Insert the “N” (Negative) filter in the left slot as
shown in the illustration.

Note

❐

Be careful to insert the filter as shown, not the other
way around.

❐

Before going to the next step, make sure that the
fresnel lens is lowered in position.

Set the base film in the holder.

Reference

Regarding setting the base film,

☛

see page 217.

Open the film cover and while pressing the holder
lever to the left, insert film strip holder the right
slot.

Insert the holder until the

★

mark is placed as

shown in the illustration.

Press the [Shading] key.

Note

❐

The machine will start shading automatically.

TRSR0F0E

1: Filter

1: Holder lever

TRSR0J0E

Selecting the Film Type and Performing Shading

Summary of Contents for Aficio 6010



























































































































































































































































































Search results

Summary of Contents for Aficio 6010

Reviews:

Related manuals for Aficio 6010

Brands by name

Popular brands

Ricoh Aficio 6010, Operating Instructions Manual

Search results

Summary of Contents for Aficio 6010

Reviews:

Related manuals for Aficio 6010

Brands by name

Popular brands