manualshive.com logo in svg

Ricoh Aficio 6010, Operating Instructions Manual, Page: 197 / 282

Share
Download
Ricoh Aficio 6010 Operating Instructions Manual Download Page 197

181

What to do if Something

Goes Wr

ong

e

Removing Jammed Staples

Note

❐

Staples might be jammed because of curled copies. In this case, try turning the copy paper over in the tray. If there is
no improvement, change to copy paper with less curl.

❐

After removing jammed staples, staples might not be ejected the first few times you try to use the stapler.

1

Open the sorter stapler front cover, then turn the
dial in the arrow direction until the staple unit
stops.

2

Push the R3 holder and pull out the staple unit.

3

Push the cartridge forward to release it.

4

Pull out the cartridge.

5

Push the lock on the right side of the phase plate
to open the phase plate.

6

Remove the jammed staple.

e

Removing Jammed Staples

Summary of Contents for Aficio 6010



























































































































































































































































































Reviews:

No comments