Ricoh Aficio 6010 Operating Instructions Manual Download Page 188

Page: 188 / 282

172

Loading Paper

Reference

Regarding paper sizes that can be set,

☛

see page 238.

Note

❐

If you want to change the paper size,

☛

see page 184.

Non-recommended Paper for Paper Trays

❐

Folded, curled, creased, or damaged paper

❐

Torn paper

❐

Perforated paper

❐

Paper with conductive or low electrical resistance coating such as carbon or silver coating

❐

Thermal paper, art paper

❐

Thin paper that has low stiffness

❐

Damp paper

❐

Wavy paper

❐

Stapled paper

❐

Translucent paper

❐

OHP transparencies

Note

❐

Load paper with the side you wish to copy onto face-down in the paper trays. If copies are curled, try turning the copy
paper over in the tray. If there is no improvement, change to copy paper with less curl.

❐

Correct curls in copy paper before loading.

❐

Fan copy paper to get air between the sheets before loading.

❐

When making 2-sided copies, do not load paper in the paper tray to copy on the reverse side. Use the bypass tray.

☛

See page 52.

Loading Paper in the Paper Tray

Pull out the paper tray until it stops.

While pressing the lock lever, open the side
fences.

Loading Paper

Summary of Contents for Aficio 6010



























































































































































































































































































Search results

Summary of Contents for Aficio 6010

Reviews:

Ricoh Aficio 6010, Operating Instructions Manual, Page: 188 / 282

Search results

Summary of Contents for Aficio 6010

Reviews: