Ricoh Aficio 6010 Operating Instructions Manual Download Page 224

Page: 224 / 282

208

Guide to Components

1. Power cord

Plug the power cord into a wall outlet.

2. Holder slot

Set the holder here.

3. Filter slot

Insert the P or N filter here.

4. Film cover

To protect the slots from dust, close it when you
are not using the projector.

5. Mirror unit release lever

Slide this to the left when opening the mirror
unit.

6. Focusing lever

Adjusting the focus with this lever when you
make copies from a glass mount film.

7. Power switch

Switches the power on or off.

8. Mirror unit

Reflects the light from the projector to the copier.

9. Fresnel lens

Pull this up when setting film on the exposure
glass.

10. Lens cover

To protect the lens from dust, close it when you
are not using the projector.

11. Accessory box

Accessories should be stored here.

12. Holder lever

Use to set the holder into the holder slot.

Summary of Contents for Aficio 6010



























































































































































































































































































Search results

Summary of Contents for Aficio 6010

Reviews:

Ricoh Aficio 6010, Operating Instructions Manual, Page: 224 / 282

Search results

Summary of Contents for Aficio 6010

Reviews: