Ricoh Aficio 6010 Page 171 Operating Instructions Manual Download

Page: 171 / 282

155

ea E

diting

(Only for Edit Type)

Press the [Save Area] key.

Press the [OK] key.

Press the Start key.

Frame/Line

Editing color and widths

Note

❐

Frame/Line mode do not work with other modes.

❐

Frame/Line widths:

Metric version: 0.25 ~ 2.0mm (in 0.25mm steps)

Inch version: 0.01" ~ 0.08" (in 0.01" steps)

❐

The frame and line width might be uneven depend-
ing on the angle of the line.

Designate the areas you wish to modify.

Note

❐

For designating areas,

☛

see page 145.

Press the [Area Edit] key.

Select the color and widths.

Press the [OK] key.

Selecting Modes for Designated Areas

Summary of Contents for Aficio 6010



























































































































































































































































































Search results

Summary of Contents for Aficio 6010

Reviews:

Related manuals for Aficio 6010

Brands by name

Popular brands

Ricoh Aficio 6010, Operating Instructions Manual

Search results

Summary of Contents for Aficio 6010

Reviews:

Related manuals for Aficio 6010

Brands by name

Popular brands