manualshive.com logo in svg

Ricoh Aficio 6010, Operating Instructions Manual, Page: 159 / 282

Share
Download
Ricoh Aficio 6010 Operating Instructions Manual Download Page 159

143

Ar

ea E

diting

(Only for Edit Type)

Designating Areas

7. Enlarge

Enlarge 4

Enlarge by about 528%

Enlarge 3

Enlarge by about 394%

Enlarge 2

Enlarge by about 264%

Enlarge 1

Enlarge by about 200%

Full Image

Note

❐

After pressing the [Enlarge] key, mark a point in the displayed image to zoom in on.

8. Basic Settings

Change the job settings for the entire image.

9. Outside Area

Set modes for outside areas.

10. Area Edit

Edit inside the area.

11. Confirm Areas

Show selected areas, modes, and groups.

12. Confirm Selection

Complete a designated area.

13.  Erase

Cancel last point selected.

14.  Arrow keys

Move cursor in small steps.

15.  Scroll key

Move the portion of the original.

Note

❐

Do not press the touch panel display with any hard or sharp object.  Always use the editor pen.

❐

When you mark a point with the editor pen, the cursor position might not be quite right.  In this case, move the cursor
in small steps by pressing the arrow keys on the display.

Summary of Contents for Aficio 6010



























































































































































































































































































Reviews:

No comments