manualshive.com logo in svg

Ricoh Aficio 6010, Operating Instructions Manual, Page: 200 / 282

Share
Download
Ricoh Aficio 6010 Operating Instructions Manual Download Page 200

184

Changing Paper Size

1

st

 Tray Paper Size

Note

❐

Be sure to select the paper size with the user tools. Otherwise, misfeed might occur.

Reference

For paper sizes, weight , and the capacity that can be set in each tray, 

 ☛

 see page 238.

1

Make sure that the paper tray is not being used.

2

Pull out the paper tray until it stops.

Note

❐

Remove any remaining copy paper.

3

Adjust the back fence to the new paper size.

4

Square the paper and set it in the tray.

Note

❐

Shuffle the paper before setting it in the tray.

❐

Do not stack paper over the limit mark.

❐

Make sure the leading corners of the paper are un-
der the corners.

5

While pressing the release levers, slide the side
fences to the new paper size.

Changing Paper Size

Summary of Contents for Aficio 6010



























































































































































































































































































Reviews:

No comments